KCO-SFP+-SR 10Gb/s 850nm Multi-mode SFP+ Transceiver
Lisebelisoa
+ 10GBASE-SR/SW&10G Ethernet
Standard
+ E lumellana le SFP+ SFF-8431
+ E lumellana le 802.3ae 10GBASE-SR.
+ E lumellana le RoHS
Feletseng Maximum Ratings
| Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti |
| Mocheso oa polokelo | Ts | -40 | - | 85 | ºC |
| LelokoMongobo | RH | 5 | - | 95 | % |
| Matla a Phepelo ea Matla | VCC | -0.3 | - | 4 | V |
| Letšoao la ho Kena ha Voltage |
| Vcc-0.3 | - | Vcc+0.3 | V |
Maemo a Tšebetso a khothalelitsoeng
| Paramethara | Letšoao | Min. | Tlanya. | Max. | Yuniti | Hlokomela |
| Mocheso oa ho sebetsa ha Case | Tnyeoe | 0 | - | 70 | ºC | Ntle le phallo ea moea |
| Matla a Phepelo ea Matla | VCC | 3.14 | 3.3 | 3.47 | V |
|
| Phepelo ea Matla Hona Joale | ICC | - |
| 300 | mA |
|
| Sekhahla sa Lintlha | BR |
| 10.3125 |
| Gbps |
|
| Sebaka sa phetiso | TD |
| - | 300 | m |
|
| Fiber e kopantsoeng | Tse ngatafiber ea mode | 50125mMMF | ||||
Litšobotsi tsa Optical
| Paramethara | Letšoao | Min | Tlanya | Max | Yuniti | Ref. |
| Phetiso | ||||||
| Kgetho ya Output. Pwr | POTSO | -6 | -1 | dBm | 1 | |
| Optical Wavelength | λ | 840 | 850 | 860 | nm | |
| Karolelano ea Phello ea Optical | ER | 3.0 | dB | |||
| RIN | RIN | -128 | dB/Hz | |||
| Mask ea Mahlo a Output | E lumellana le IEEE 802.3ae | |||||
| Moamoheli | ||||||
| Boikutlo ba Rx | RSENS | -10 | dBm | 2 | ||
| Matla a Kenyeletso (Saturation Power) | Psat | 0.5 | dBm | |||
| Wavelength Range | λC | 770 | 850 | 860 | nm | |
| LOS De -Assert | TAHLEHELO | -14 | dBm | |||
| Tsebo ea LOS | LOSA | -30 | dBm | |||
| LOS Hysteresis | 0.5 | dB | ||||
Lintlha:
- Tšireletseho ea Laser ea Sehlopha sa 1 ho latela melaoana ea FDA/CDRH le IEC-825-1.
- E lekantsoe ka PRBS 231-1 mokhoa oa teko, @ 10.325Gb / s, BER <10-12.
IV.Litšobotsi tsa Motlakase
| Paramethara | Letšoao | Min | Tlanya | Max | Yuniti | HLOKOMELA |
| Phepelo ea Voltage | Vcc | 3.14 | 3.3 | 3.46 | V | |
| Phepelo ea Hona Joale | Icc | 300 | mA | |||
| Phetiso | ||||||
| Phapang ea ho kenya letsoho | Rin | 100 | Ω | 1 | ||
| Phetoho e le 'ngoe ea ho kenya data | Vin, maq | 180 | 700 | mV | ||
| Fetisetsa Disable Voltage | VD | Vcc–1.3 | Vcc | V | ||
| Fetisetsa Enable Voltage | VEN | Vee | Vee+ 0.8 | V | 2 | |
| Fetisetsa Thibela Assert Nako | 10 | us | ||||
| Moamoheli | ||||||
| Phapang e fapaneng ea tlhahiso ea data | Vout, maq | 300 | 850 | mV | 3 | |
| Nako ea ho phahama ha data | tr | 28 | ps | 4 | ||
| Nako ea ho oa ha data e hlahisoang | tf | 28 | ps | 4 | ||
| Phoso ea LOS | Phoso ea VLOS | Vcc–1.3 | VccHOST | V | 5 | |
| LOS Tloaelehileng | Tloaelo ea VLOS | Vee | Vee+0.8 | V | 5 | |
| Khahlano ea Phepelo ea Matla | PSR | 100 | mVpp | 6 |
Lintlha:
- E hoketsoe ka kotloloho ho li-pin tsa ho kenya data tsa TX. AC e kopantsoe ka mor'a moo.
- Kapa potoloho e bulehileng.
- Ho 100 ohms ho felisoa ha phapang.
- Tsena ke boleng ba 20-80% bo sa sefang
- Lass Of Signal ke LVTTL. Logic 0 e bontša ts'ebetso e tloaelehileng; logic 1 e bontša hore ha ho lets'oao le fumanoeng.
- Kutloelo-bohloko ea moamoheli e lumellana le phepelo ea motlakase ea sinusoidal modulation ea 20 Hz ho isa ho 1.5 MHz ho fihlela boleng bo boletsoeng bo sebelisitsoeng ka marang-rang a khothaletsoang a phepelo ea motlakase.
Hlahisa Litekanyo
Ikamahanya le SFF-8432 rev5.0, lintlha tse ntlafalitsoeng tsa sebopeho sa Pluggable form.






